Your profit and loss statement tells you whether the business made money. It does not tell you why, or what to change.

Contribution margin does. It splits your costs into layers, so you can see which part of the business is healthy, which part is leaking money, and which lever to pull to lift profit.

Unit economics is the profit math for a single unit of what you sell. A unit is whatever you count when you make a sale: an order for an online store, a subscriber for a software company, a client for a coach, a job for an electrician. Unit economics asks what that one unit earns, and what it costs to deliver it, win it, and serve it. If one unit makes money, selling more of them grows profit. If one unit loses money, selling more makes things worse.

CM1, CM2, and CM3 are three steps of one calculation. The percentages are the same whether you run them for a single order or a full month of sales. You do not need an accounting background. If you can read a P&L and work out a percentage, you can use everything on this page.

Why it is worth knowing

A P&L is a record. It tells you what happened last month and ends in one profit figure. That is useful for tax and reporting, but it is hard to act on, because a single number does not say what to change. Contribution margin takes the same figures and sorts them so you can see what to do next.

  • See where profit is made and lostEach layer of margin belongs to a different part of the business. When profit is low, the layers show you which part to look at first.
  • Know what one more sale is worthAverage profit hides this. The margin left after variable costs is what each extra sale adds toward your overhead and profit.
  • Set marketing budgets with a ceilingCM1 shows the most you could ever pay to win a customer before the first sale loses money. CM2 shows whether you are winning customers at a profit.
  • Pick the right leverRaising prices, cutting costs, spending more on ads, and trimming overhead change profit by very different amounts. The layers let you test each one before you commit.

Glossary

Plain-English meanings for the terms used in this article, grouped by topic.

The basics

Unit economics
The profit math for one unit of what you sell, such as an order, a subscriber, a client, or a job.
Revenue
The money customers pay you, after discounts.
Variable cost
A cost that rises and falls with how much you sell, such as shipping, ad spend, or a coach’s hours.
Overhead (fixed costs)
Costs that stay about the same whatever you sell, such as rent, salaries, and flat-rate software.

Costs and the three tiers

Contribution margin
What is left of revenue after variable costs. It contributes toward overhead and profit. Shown here in three layers: CM1 after COGS, CM2 after acquisition, and CM3 after other variable costs.
COGS
The costs of making and delivering what you sold. In a service business this includes the labour of delivering it. It comes off revenue first, to give CM1.
Acquisition
What you spend to win customers: ads, agency fees, content and SEO, and sales commissions. It comes off CM1 to give CM2.
Other variable costs
Costs that rise with each sale but are neither COGS nor acquisition, such as support, returns and refunds, and marketplace fees. They come off CM2 to give CM3.

From margin to profit

Gross profit
Revenue minus COGS. It often matches CM1, but companies sort some costs differently.
EBITDA
Earnings before interest, taxes, depreciation and amortization. The profit left after all the costs of running the business, before interest, taxes and non-cash accounting items.
Net profit
What is left after every cost, including interest and taxes. The money you and any shareholders can pay out as a dividend or keep in the business.
CAC / LTV
Customer acquisition cost: what it costs you to win one customer. Lifetime value: the total margin that customer brings across the whole relationship, not just the first sale.

The three tiers

Think of the tiers as three questions asked in order. Is each sale worth making? Is each customer worth winning? Is each customer worth serving? A business can pass one question and fail the next, and the tier that fails tells you where to work.

CM1

Contribution after COGS

Revenue − COGS

Takes out COGS: the cost to make and deliver what you sold. For ecom that is product, shipping, pick and pack, and payment processing. For a service, it is the labour of delivering the work.

Left over: what remains after COGS, carried into CM2.

Does each sale make money before any marketing?

Levers: pricing, supplier cost, fulfillment efficiency, delivery speed.

If CM1 is weak, marketing cannot rescue the business.

CM2

Contribution after acquisition

CM1 − acquisition (marketing and sales)

Takes out ads, agency fees, content and SEO, affiliate and referral fees, sales commissions, and setter or closer pay.

Left over: what remains after acquisition, carried into CM3.

Does buying a customer pay for itself?

Levers: channel mix, creative, conversion rate, sales process.

A negative CM2 on the first order is only fine if repeat purchases or renewals (the customer’s lifetime value) pay it back.

CM3

Contribution after serving

CM2 − other variable costs

Takes out support, returns and refunds, per-sale marketplace and app fees, and retention costs that grow with orders.

Left over: available to cover overhead and profit.

What is left to pay for overhead and profit?

Levers: return rate, support load, retention, marketplace fees.

The closest figure to true profit per sale.

Overhead (fixed costs such as salaries, rent, flat-rate software, and legal and accounting retainers) sits below the three tiers. It comes off what CM3 leaves over to give operating profit.

Contribution Margin Calculator

Change any amount and watch what each tier leaves over. Every figure is per $100 of revenue by default.

Using it to raise profit

Knowing the tiers only helps if it changes what you do. Each tier points to a different group of levers, and the numbers show which lever is worth the most.

Which lever to pull

If you seeIt meansLevers to try
CM1 is lowEach sale leaves little after delivery, before any marketingRaise prices or bundle. Renegotiate supplier or freight costs. Cut waste in delivery or fulfillment. Drop unprofitable products or clients.
CM1 healthy but CM2 lowWinning customers costs too much for what a sale earnsImprove conversion. Cut weak channels. Raise average order or deal size. Build referrals and repeat purchases.
CM2 healthy but CM3 lowServing customers after the sale uses up the marginReduce returns and refunds. Improve self-service support. Negotiate marketplace and app fees. Improve retention.
CM3 healthy but thin operating profitOverhead is too large for current volumeGrow volume. Trim or renegotiate fixed costs. Hold off on new fixed commitments until volume supports them.

What a 10% improvement is worth

Take the example in the calculator: $100 of revenue and $8 of operating profit. Here is what happens to that profit when you improve one lever by 10% and change nothing else.

LeverChangeOperating profitGain
Starting pointNone$8.00—
Raise your priceRevenue $100 to $110$18.00+$10.00 (+125%)
Cut COGS$40 to $36$12.00+$4.00 (+50%)
Cut acquisition costs$30 to $27$11.00+$3.00 (+38%)
Cut overhead (fixed costs)$14 to $12.60$9.40+$1.40 (+18%)
Cut other variable costs$8 to $7.20$8.80+$0.80 (+10%)

Price is usually the strongest lever, because the extra revenue drops straight to profit. Every other lever is worth less, which is a useful reminder that cutting costs has limits.

Why volume can multiply profit

Fixed costs do not rise when sales rise. Once a sale has covered its variable costs, what is left goes toward overhead, and after overhead is covered it goes to profit. Here is the same business at two revenue levels.

Per monthAt $10,000 revenueAt $20,000 revenue
Revenue$10,000$20,000
COGS−$4,000−$8,000
Acquisition (marketing and sales)−$3,000−$6,000
Other variable costs−$800−$1,600
Left after CM3$2,200 · 22%$4,400 · 22%
Overhead (fixed costs)−$1,400−$1,400
Operating profit$800 · 8%$3,000 · 15%

Revenue doubled and profit nearly quadrupled. This assumes it costs the same to win each extra customer. In practice acquisition costs often rise as you scale, which is why CM2 deserves a close watch during growth.

Break-even

Break-even revenue = overhead (fixed costs) ÷ CM3 percentage

With $1,400 of overhead per month and a CM3 of 22%, break-even is $1,400 ÷ 0.22, or about $6,364 of revenue. Below that the business loses money. Above it, every extra $100 of revenue adds $22 toward profit.

This number also tells you what a new hire costs. Add the salary to your fixed costs and recalculate: how much more revenue does the business need to cover it?

How it differs by business type

The ladder is the same in every business. What changes is which costs sit in each tier’s box.

At a glance

BusinessOne unit isBiggest COGS itemTypical CM1Where margin gets squeezed
E-commerceOne orderProduct cost and shippingVaries by categoryReturns and rising ad costs
SaaSOne customer for one billing periodHosting and support70 to 85%Churn and support load
CoachingOne client or programCoach time, including yours50 to 80%Delivery hours per client
ConsultingOne engagement or retainer monthConsultant and contractor time40 to 60%Utilisation and rework
TradesOne jobTechnician labour and materials35 to 55%Unbilled hours and callbacks
LogisticsOne loadDriver pay and fuel25 to 40%Empty miles and idle trucks

Ranges are rough rules of thumb. Your own numbers matter more than any benchmark.

Where software costs land

Every business uses software, so the question is where its cost lands. The test is the same everywhere: does the bill rise with volume, and what is it for?

Software costTierWhy
Flat monthly plans for running the business: CRM, accounting, project management, email platform, Shopify planFixedThe bill is the same at 10 sales or 1,000.
Hosting, cloud compute, and per-call APIs inside a product you sellCM1Usage grows with customers, and it is the cost of delivering the product. This is SaaS.
Payment processing and per-order shipping or fulfillment softwareCM1Charged on every sale.
Ad platforms and lead tools priced by spend or volumeCM2Cost scales with how many customers you buy.
Revenue-share apps, marketplace fees, helpdesk tools priced per ticketCM3Cost scales with orders or support volume after the sale.
Engineering salaries to build your own productFixedProduct development (R&D) is overhead, even in SaaS.

Where marketing lands

Anything you spend to win customers belongs in CM2. That includes ad spend and also the agencies and specialists who help you win customers.

ExpenseWhere it goes
Facebook, Google, and other paid ad spendCM2
Agency fee charged as a percentage of ad spendCM2
Agency flat monthly retainerCM2 — it exists to buy customers
SEO, blog writing, press releasesCM2, on its own line
Brand design, website platform, marketing salaries unrelated to acquisitionFixed (below the three tiers)

The rule: put all acquisition marketing in CM2 and give each type its own line. Leaving agency and content costs out makes CM2 look better than it is.

Common mistakes

  • Treating your own time as freeFor founders who deliver the work themselves, delivery hours must carry a market rate. Leaving them out makes CM1 look better than it is and builds decisions on a false floor.
  • Mixing definitions between reportsAgencies, finance and benchmarks often draw the tiers differently. Write down which cost goes where and apply it consistently every month.
  • Judging recurring revenue on the first saleFor retainers and subscriptions, the first order may show a negative CM2. That is only sustainable if repeat revenue pays it back. Know your LTV and compare it to your CM2.
  • Reading percentages without dollarsA 60% margin on a small revenue base may not cover overhead. Look at the percentage and the dollar amount together. The percentage tells you efficiency. The dollars tell you scale.
  • Mixing fixed and variable without a ruleSalaried staff who spend most of their time on delivery are often allocated to CM1. Choose a rule and apply it every period.

Where to start

  1. Pick a period, such as last month or last quarter, and pull your P&L.
  2. Sort every cost into one of four groups: COGS, acquisition, other variable, or fixed.
  3. Work down the ladder. Calculate CM1, CM2, and CM3 as both dollar amounts and percentages of revenue.
  4. Find the tier that looks weakest relative to your business model.
  5. Pick one lever from that tier, change it, and measure again next period. The calculator above lets you test the change first.

Build the waterfall. Know your numbers at every layer. Then make decisions from there.